DRIPCAP® has a uniform distribution of water and nutrients, which completely covers the surface of the culture medium, efficiently and completely, without the need to relocate DRIPCAP®, saving manpower and costs.

Drip piles allow algae to easily form on the exposed wet surface. In most cases, it takes manpower to remove or scrape algae, weeds so they do not grow.

DRIPCAP® Covers the surface, blocks light and minimizes algae, saving money and manpower due to non-application of algae products.

To apply in flexible Ø25mm hose

To apply in flexible Ø25mm hose

Submersible Pump with Low Consumption 12V

Diameter 65mm - Height 125mm

Pumping: 15L/min

Pressure:0,6 Bar

Average comsuption: 25/35W

Submersible Pump 

With this pump you can install your own sprinkler system, its pumping allows you to water about 1500 plants in the NFT hydroponics growth system.

Pumping:5000l/h

Used in hydroponics, aquariums, lakes, etc.

Submersible Pump 

Pumping: 7000L/H

Max Hight for Hose Pumping: 8m

Max hose Lenght: 10m

Power: 400W

Voltage: 220-240V/50Hz

Weight : 2,1Kg

Size : 130x200(h)x105mm

Submersible Pump 

With this pump you can install your own sprinkler system, its pumping allows you to water about 1500 plants in the NFT hydroponics growth system.

Used in hydroponics, aquariums, lakes, etc.

Water Drainage collector (700mm) with 4 hydroponic pipe entries spaced by 200mm

Graduated cup to measure pH corrector solutions, adittives or conductivity

Graduated cup to measure pH corrector solutions, adittives or conductivity

Graduated cup to measure the several nutrients

Rectangular plastic tank with lid

Bottom hole for faucet

Size: 60cm (height)

Capacity: 47L

FEEDING HOSE (200 + 65CM) BETWEEN PUMP AND WATER DISTRIBUTION COLLECTOR (CDA), EQUIPPED WITH CONNECTION ACCESSORIES.

"T" shaped pipe with 40mm diameter used in the drainage of the nutritious solution to the tank.

A timer that can be used outdoors, can be programmed with 15min brakes.

Mercury thermometer with suction cup, can be stuck to the water tank wall.

Pipe used to drain the water that exits the drainage blind tops, 40mm diameter.

Air Pump Low Consumption and silent

Size: 122x70x55mm

Speed ajustment

Pumping: 4L/Min / 2 exits

Preassure: 0.016Mpa

Power: 4W

Voltage: 110-240V, 50/60Hz

Weight: 0,700kg

Submersible Pump Low Consumption and silent

With this pump you can install your own sprinkler system, its pumping allows you to water between 100 to 500 plants in the NFT hydroponics growth system.

Pumping: 4500L/h

Max Hight for Hose Pumping in a 10mm hose: 2m

Power: 55W

Voltage: 115-230V, 50/60Hz

Weight : 0,750Kg

Used in hydroponics, aquariums, lakes, etc.

Air Pump Low Consumption and silent

Size: 185x95x70mm

Speed ajustment

Pumping: 2X6L/Min 

Preassure: 0.025Mpa

Power: 10W

Voltage: 110-240V, 50/60Hz

Weight: 1kg

Submersible Pump Low Consumption and silent

With this pump you can install your own sprinkler system, its pumping allows you to water between 100 to 500 plants in the NFT hydroponics growth system.

Pumping: 3000L/h

Max Hight for Hose Pumping in a 10mm hose: 1,65m

Power: 45W

Voltage: 115-230V, 60Hz

Weight : 0,650Kg

Used in hydroponics, aquariums, lakes, etc.